My EZDOK (v2) profile for PMDG 747 Queen of the Sky II.
I created this profile for Full HD wide screens (1920×1080). You will get the best results with this resolution (in either windowed or full screen mode). Different screens (especially smaller) may require adjusting this settings. If you haven’t yet – you will need to set WideViewAspect=True option in [Display] section of your fsx.cfg.
This profile was created in EZDOK v2 for the PMDG 747 v3 (QOTS II). It should be compatible with all models (freighter, BCM, ER, etc.), but you will have to import it several times (once for each 747 model).
I have assigned keyboard shortcuts to some of the views (numerical keyboard and numerical keyboard + ctrl). Make sure there is no conflict between EZDOK shortcuts and any keyboard shortcuts you may have in your FSX or P3D.
Special effects are disabled in my views.
I created several views that I need to operate the plane and I added views that I like when taking screenshots. I enabled TrackIR for three Pilot views. TrackIR is disabled in panel views to make operations easier. If you don’t use TrackIR at all, you may leave this option enabled.
Pilot view (Num 8 – up arrow on the numeric keyboard)
In this view I can see everything I need to control the plane on departure and approach. Two nav displays are visible so that I can monitor LNAV and ILS or VOR indication at the same time. Screens of two FMCs are also available – so I can click them and show the 2d panel. My virtual head is located high enough to see the runway when on final approach with full flaps.
Overhead (Num 7)
Lights (Num 9)
I think that it’s more comfortable to set lights with this view.
Pedestal (Num 2 – down arrow)
EICAS (Num 3)
EICAS displays and buttons controlling the lower EICAS.
Standing in the middle
Overhead – back
Pilot looking left (Num 4 – left arrow)
Useful when performing circling approach and during ground operations.
Pilot looking right (Num 6 – right arrow)
Radio (Num 1)
Comms – better angle to select frequencies.
Throttle, flaps, parking brake, spoilers, trim.
Tail view (Ctrl + Num 8)
Right wing (Ctrl + Num 6)
Left wing (Ctrl + Num 4)
Right front (Ctrl + Num 9)
Left front (Ctrl + Num 7)
Front (Ctrl + Num 2)
Left engine (Ctrl + Num 1)
Right engine (Ctrl + Num 3)
* – “under construction”
It’s a work in progress. It usually takes 20-30 hours of flight (more in long range planes) and 20-30 operations to find the best views. Please consider this a temporary state. Other views may also be slightly modified (for example “engine” views need adjusting to the wing flex.
I will also add new views in next two or three weeks so check this post again for an update that will include:
- spoiler view
- flaps view
- additional gear views
- passenger window views
Add-ons that you can see in this text: